Troubleshooting Tips if your Wavlink Wifi Extender not working
If you are feeling anxious because your Wavlink wifi extender is not working and the worst thing is when you are not even able to find out the reason why this is happening? If your Wavlink wifi extender is not working then there can be number of reasons for it.
Observe these tips if you want to know the reason that why your Wavlink wifi extender not working.- First of all, observe the distance of your router and extender and it must be 10-15 feet.
- Poor internet connection can also contribute the trouble and cause error in your extender’s working.
- Keep a check on your firmware update; it can potentially create interruptions.
- The setups of two devices which are not compatible can also cause this type of trouble; it can cause hindrance in your connection setup with extender.
- Poor connection setup between your extender and router is another possible reason for Wavlink extender not working.
Wavlink Extender not working? Fix it in this way:
Well, when you know the reasons then you might be searching for the ways on how to fix your wavlink connectivity issues. Find out the given tips and tricks to get your device on working mode again.
Restart your extender – First step you can take is to unplug your extender from the power source and restart it, after that again plug it back in after the pause of some seconds. This step can resolve minor errors, blockages, and other connectivity issues.
Look at the location of your Wavlink extender – If your extender and router are placed far away then it will cause a weak signal. Be sure that your extender is placed in the center of the router and the area where you want to expand your coverage.
Configuration of your Wavlink extender – Configuration is another significant aspect. Recheck the settings such as the name of the network and password, be sure that they match those of your main router.
Upgrade your Firmware – Sometimes the firmware you are working on is not updated in this case go to the Wavlink website and inspect if there is any update notification for your firmware, if yes then follow the instructions and update your firmware.
Reset your extender – If none of the above step work for you then Resetting your extender will work for you. Besides erasing all the saved settings, it will remove unnecessary settings that might be at fault.
Easy ways to set up Wavlink Extender
Wavlink Wifi extender that helps to expand the coverage of wireless network is the most affordable option to improve your wifi coverage. The Wavlink extender is the most reliable name that has become the most recognized choice among customers. You can setup your extender by following these tips:
Firstly, within the range of your modem find the electrical outlet and plug in the Wavlink extender.
- Now let the power on light turn green and that probably will be the indicator that the device is turned on.
- After this, link your device be it a computer, laptop, or phone to the Wavlink extender.
- You will be asked to fill in the details of the default network name and password.
- In the selected browser paste this web address 168.10.1 or wifi.wavlink.com to reach the configuration page.
- To access the configuration you will be asked to enter the login details.
- After entering the details, once you logged in go to the “Wireless” option and then tap on the settings that are usually named “Wireless Settings”.
- Now this will navigate you to the menu of “Wireless Settings”, here to find the available Wi-Fi networks in your area, click on “Scan”.
- Check for your network from the given list and clink connect on it.
- Once you’ve entered the password for the chosen network, click “Apply” to save the change.
- Allow the Wavlink extender to connect to the specific network.
- Once you have executed your process and your extender is connected to the wifi network, unplug it and take it to the location where you want to extend your network coverage.
- Our devices is ready to use and to expand your WiFi network range.