How to Fix the Issue of Wavlink WiFi Extender IP Not Working

Wavlink extenders are amazing in extending the network range and eliminating the dead zones in your place so that you can have seamless experience of internet accessing. If your wavlink wifi extender IP is not working while you are trying to access its web home page then you must understand the cause behind it first and then apply the solutions given here in this blog.
The problem can occur because of various factors like network or connection issue, incorrect settings or may be your device is having some issue.

Check the physical connections first, your router and extender must be associated properly, and has the proper power supply as well.
The power sockets and power supply must be checked as this can not only create issue in access but can harm your extender as well.
Loose and damaged cable can create issues so you must replace it.
The extender’s placement also plays an important part so make it certain that it has been setup within the router’s range.
Power cycle the extender to resolve connectivity issue. Separate it from the power basis and plug it in after few seconds of wait.
You must pay attention to its LED indicators so that you can figure it out what is the actual by arbitrating to the manual book of extender.
Wavlink extender’s default IP address id 192.168.1.1 so you can this to access the account.
Try righting the extender to factory default setting by performing the reset. You have to push and grasp the reset knob for few jiffies and then release it. After the completion of resetting, you have to reconfigure the extender’s settings and Wavlink extender setup.
Outmoded version of firmware can lead you to in this issue. Check the official website of wavlink to know about latest update. Download it from there and install it.
If your access device is having the firewall and security software then they can block the access of extender’s IP address, so disable them temporarily until your access is completed.
Last resort you can try is contacting wavlink’s support service.

How to reconfigure the Wavlink extender’s access

Your device and wavlink extender must be connected well to each other through its network. In the web interface put extender’s IP address and access the login page where you have to enter default login specifics. The page of configuration will appear in front of you where you have to reconfigure the settings for extender. Complete the wifi connection setup with your home network and apply the changes. Some extenders need to be rebooted after the setting changes. Reconnect the devices with extended network and check the connection speed including the range.

Final thoughts

When you are not able to access your extender or its IP address then it can be problematic at first place but you need to find the cause, check everything that can restrict the access and then apply the suitable solution. For more help or queries you can contact our team of experts.